Model 10A chamber length

longarm · Post by **longarm** » Sat Feb 12, 2011 10:12 pm

Can a person tell by the serial number if a gun is chambered for 2 3/4" or 2 9/16"?

I have heard rumor that after a certain SN the following M10s manufactured were all 2 3/4". However 1) I don't know if that is a fact, and 2) the SN listed as a cut-off differs, depending on the source (I have read 'after 69xxx', and I have read 'after 89xxx').

What say you, oh Wise Ones of the Remington Society?

Many thanks in advance.
Dan

Researcher · Post by **Researcher** » Sat Feb 12, 2011 11:19 pm

All Remington Repeating Shotguns/Model of 1908/Model No. 10s were chambered for 2 3/4 inch shells. Remington never marketted a 12-, 16-, 20-, or 28-gauge pump or autoloader for shells shorter than 2 3/4 inch.

longarm · Post by **longarm** » Sun Feb 13, 2011 7:40 pm

Thank you sir.

Beware of scammers.

Always verify the legitimacy of individuals or organizations before sharing personal info or making payments. Do your research. RSA is not responsible for losses or damages caused by scams or fraudulent activity.

Model 10A chamber length

Model 10A chamber length

Re: Model 10A chamber length

Re: Model 10A chamber length