40-50 sharps

Yellowhouse · Post by **Yellowhouse** » Sun Jan 09, 2011 3:48 pm

Yep, you should see the shadow of the shoulder when viewed from the breech.

Yellowhouse · Post by **Yellowhouse** » Sun Jan 09, 2011 7:29 pm

Diameter at the breach should be considerably larger than ~.40 is another way. I don't know but I'd say it was uncommon but not rare. Seen more in the #3 rifles I think.

Yellowhouse · Post by **Yellowhouse** » Mon Jan 10, 2011 10:27 am

A chamber cast is always advised. It may be stamped one thing but altered somewhere down the line.

Yellowhouse · Post by **Yellowhouse** » Mon Jan 10, 2011 9:34 pm

Order you some Cerrosafe from Brownells or Midway and go by the directions. There are some how to posted on YouTube as well. A paper towel or rag works fine.

stanforth · Post by **stanforth** » Mon Jan 17, 2011 8:49 am

If you simply want to know wether it is straight or bottleneck, simply make a wad of rag or paper toweling and push it through with a rod. You should feel a bottleneck.

rudybolla · Post by **rudybolla** » Sat Feb 19, 2011 9:50 am

You can make a quick and dirty chamber cast with wax. Doesn't hold up well, but is good for a quick check of what you have there.

Beware of scammers.

Always verify the legitimacy of individuals or organizations before sharing personal info or making payments. Do your research. RSA is not responsible for losses or damages caused by scams or fraudulent activity.

40-50 sharps

Re: 40-50 sharps

Re: 40-50 sharps

Re: 40-50 sharps

Re: 40-50 sharps

Re: 40-50 sharps

Re: 40-50 sharps