722 "B" question
-
- Posts: 30
- Joined: Tue Jun 30, 2009 12:45 pm
- Location: Saskatchewan Canada
722 "B" question
OK folks,
I need some expert opinions regarding whether this rifle is wearing factory B wood.
The current owner says yes and that Remington confirmed it.
What say you all?
TIA!
I need some expert opinions regarding whether this rifle is wearing factory B wood.
The current owner says yes and that Remington confirmed it.
What say you all?
TIA!
Re: 722 "B" question
Not an expert but, I have seen a few original 721B and 722B rifles over the years....none had the hook grip, forend cap or checkering pattern like the rifle pictured.
Re: 722 "B" question
.
Nope!
Looks like an old Fajen stock (which somebody checkered) to me.
Nice looking, but hardly "factory".
Den
.
Nope!
Looks like an old Fajen stock (which somebody checkered) to me.
Nice looking, but hardly "factory".
Den
.
-
- Posts: 30
- Joined: Tue Jun 30, 2009 12:45 pm
- Location: Saskatchewan Canada
Re: 722 "B" question
I'm thinking of buying this rifle.
I've been told it is 80% but only have 3 pictures to go by...
According to my Blue Book a factory BDL in .244 at 80% is $500
so how would this stock affect the overall value of the rifle?
I've been told it is 80% but only have 3 pictures to go by...
According to my Blue Book a factory BDL in .244 at 80% is $500
so how would this stock affect the overall value of the rifle?
Re: 722 "B" question
.
The majority of the 721s and 722s were "plain Jane" and putting a stock like that on one does enhance the appearance.......but, then, it's no longer "original".
Purchasing one of those stocks to put on a rifle could amount to a couple of hundred dollars, or more. Also, it's pretty hard to find older firearms that are completely original.
I did some searching on the gun sales sites and didn't find any over about $450.00.
If the seller is asking an amount in the range you've stated, it probably wouldn't be out of line, considering the deflation of our money. About 20 some years ago when I was accumulating my 721s, 722s and 725s, they were going for about half (or less) of the dollar figures we're throwing around.
Hope that helps.
Den
.
To me, it depends on what the seller is asking and what the buyer's expectations are.BrotherRockeye wrote:I'm thinking of buying this rifle.
I've been told it is 80% but only have 3 pictures to go by...
According to my Blue Book a factory BDL in .244 at 80% is $500
so how would this stock affect the overall value of the rifle?
The majority of the 721s and 722s were "plain Jane" and putting a stock like that on one does enhance the appearance.......but, then, it's no longer "original".
Purchasing one of those stocks to put on a rifle could amount to a couple of hundred dollars, or more. Also, it's pretty hard to find older firearms that are completely original.
I did some searching on the gun sales sites and didn't find any over about $450.00.
If the seller is asking an amount in the range you've stated, it probably wouldn't be out of line, considering the deflation of our money. About 20 some years ago when I was accumulating my 721s, 722s and 725s, they were going for about half (or less) of the dollar figures we're throwing around.
Hope that helps.
Den
.
-
- Posts: 30
- Joined: Tue Jun 30, 2009 12:45 pm
- Location: Saskatchewan Canada
Re: 722 "B" question
it does help Den,thanks.
Unfortunately the current owner seems to think it's worth $800 in spite of the current Blue Book value of an original 80% (his grading) condition firearm.
Unfortunately the current owner seems to think it's worth $800 in spite of the current Blue Book value of an original 80% (his grading) condition firearm.
Re: 722 "B" question
I'd sure like to see the confirmation from Rem. I'd probably be willing to pay the seller if he could produce it.
I'll step out on a limb and say it sure ain't factory "B" wood. If the rifle was a "B" it would be so stamped. Rem would not put "B" grade wood on a standard production rifle, and that ain't "B" grade wood anyway.
A factory recoil pad on a 722????
I'll step out on a limb and say it sure ain't factory "B" wood. If the rifle was a "B" it would be so stamped. Rem would not put "B" grade wood on a standard production rifle, and that ain't "B" grade wood anyway.
A factory recoil pad on a 722????
-
- Posts: 30
- Joined: Tue Jun 30, 2009 12:45 pm
- Location: Saskatchewan Canada
Re: 722 "B" question
would it be marked on the barrel?
The fella is French so communication ain't simple
The fella is French so communication ain't simple
she have also a small B on the barrel in memory
Re: 722 "B" question
.
http://www.remingtonsociety.com/rsa/que ... arrelcodes
Den
.
The letter you're being quoted is probably part of the date code and not a grade letter.BrotherRockeye wrote:would it be marked on the barrel?
The fella is French so communication ain't simple
she have also a small B on the barrel in memory
http://www.remingtonsociety.com/rsa/que ... arrelcodes
Den
.
-
- Posts: 30
- Joined: Tue Jun 30, 2009 12:45 pm
- Location: Saskatchewan Canada
Re: 722 "B" question
lol - thanks Den...
to be honest,getting a straight answer is like pulling teeth...trying to get more pictures or information is frustrating as ...
Think I'll keep looking unless he comes around a bit...
Thanks very much.
to be honest,getting a straight answer is like pulling teeth...trying to get more pictures or information is frustrating as ...
Think I'll keep looking unless he comes around a bit...
Thanks very much.
-
- Posts: 52
- Joined: Wed Mar 25, 2009 8:17 pm
Re: 722 "B" question
I don't want to burst anybody's bubble,but the stock has never seen the Rem. Factory. I own several Rem. grade guns,B through F grade. The upgraded wood has definite patterns they follow. This wood is very nice,but not original. I agree it looks like a Fagen wood. The hooked grip and rosewood grip cap is a no brainer. I think it wort maybe a little more than a standard gun as most people want a gun like this original. This was probably done in the 60 early 70's range since this look was popular then.
-
- Posts: 30
- Joined: Tue Jun 30, 2009 12:45 pm
- Location: Saskatchewan Canada
Re: 722 "B" question
thanks for the reply.
nobody here has a bubble to burst, we all know that isn't a factory stock.
The fella trying to sell it to me for double what it's worth is the only one clinging to the factory myth.
nobody here has a bubble to burst, we all know that isn't a factory stock.
The fella trying to sell it to me for double what it's worth is the only one clinging to the factory myth.
Re: 722 "B" question
So.... Why are you still interested in a gun with an aftermarket stock & a price double what others might sell for??? Why not move on to an honest gun and an informed seller??? My guess is that it is worth less than an original....
-
- Posts: 30
- Joined: Tue Jun 30, 2009 12:45 pm
- Location: Saskatchewan Canada
Re: 722 "B" question
go back 3 posts and read again John
Re: 722 "B" question
Those Frogs are real knotheads aren't they ?